KAWASAKI VULCAN VN750

KAWASAKI VULCAN

STATOR PLATE MOD

KIT INCLUDES:
1 – Stainless Steel Laser Cut Plate.
3 – Zinc Metric Button Head bolts (M6x12mm).
3 – Zinc Metric Socket Head bolts (M6x25mm).
3 – Stainless Steel Spacers.
3 – Black Set Screws (M6x25mm).
1 Instruction & Liability Release Sheet.

 

KIT COST IS $90

KIT COST ON EBAY IS $100.
Use eBay if you are outside the USA.

If you are outside the USA, the plate is available on eBay, where it can be shipped globally using their Global Shipping Program.
Click Here to go to the eBay page.

 

All though this plate is laser cut and has been tested, there is still risk involved.
Do this mod and use this plate at your own risk.
GC-Extreme will not be held responsible for any damages.
By purchasing this kit, you release GC-Extreme from any liabilities.
NO REFUNDS WILL BE GIVEN

WWW.GCEXTREME.COM

You probably discovered my site and this kit through the VN750.com forum or the VN750.com Forum Members Facebook page.

 

BASIC INSTRUCTIONS – More instructions and videos can be found online on the forum and my dedicated Facebook Page, Kawasaki VN750 Stator Plate Mod.

  1. Remove Main Engine Side Cover. Remove Stator.
  2. Cut out required center. Use a dremel or scroll saw. Stay within the outer 3 bolt holes.
  3. Grind down ribs on outer cover.
  4. Grind down ribs on stator mount for room for the 3 spacers
  5. Bolt Stator to the cutout center using 3 metric socket heads and spacers.
  6. Bolt mod plate to the other side of the stator center cutout using the 3 metric button heads.
  7. Use the 3 black long setscrews to align and hold the unit in place while you slip the outer cover over, replacing them one by one with the original screws.

Stator Replacement Project Photos:
The dreaded stator and r/r project. All VN750 owners fear it, and don't look forward to doing it. Follow me as I work thru and disassemble my bike for this repair. (Spline lube included).

Day1 - Day 2 - Day 3 - Day 4 - Day 5

 

Below are my YouTube Videos, and other people's explaining the process.

My Newest Video:

 

Older Video:

 

A Customer's Video, with more details:

Another Rider's Video:

 

If you request any further help, or have any questions, please contact me on Facebook or the VN750 Forum.
Email Me, Click here.

THANK YOU, I HOPE YOU GET YOUR VULCAN BACK ON THE ROAD. RIDE SAFE!

GC-EXTREME
Glenn C. Cox

If you want to contact me in regards to anything about my VN750 projects, contact me on the VN750.com forum, Click here, http://www.vn750.com/forum/member.php?u=7844